Hello everyone, ahead of time thank you to all who contribute here on this reddit. It allows beginners like myself to read older post and learn from them. I just finished producing a song for the first time from start to finish on Fl Studio. It took me two months to finish it. I’m an intern so could only work on it an hour a day and on some weekends, and I am not sick of it it makes me pretty happy and feel pumped type of mood. So, I wish to proceed to mastering it. I made a song that can be considered jungle terror (big room like). I’ve watched a few tutorials and picked up some things. Mixing wise I have equalized all my samples, cut off frequencies below 30-40 on my kick, roughly 180-220 on my mids, and 400-650 below for some samples in the higher frequencies. I used pink noise to set my volumes, in the end it I think it was pretty well balanced, but I had to make finishing touches by listening to my mix as a whole. I’ve applied my reverb among some other samples. I have no limiter on my master or individual channels. Is there anything else I can do that you guys would recommend to assure my mix is ready to master. Any help is greatly appreciated.
Submitted March 02, 2018 at 11:30AM by IAmCes3 https://www.reddit.com/r/edmproduction/comments/81ekx2/finishing_a_mix/?utm_source=ifttt